How to clean injection molding machines, extruders and blow molding machines ?
Nowadays the cost of most things have been raise a lot, especially labor and raw materials, so companies are doing their best to save costs. Thermoplastic machinery often occur color changes or carbonization problems during the production. At present, most companies often need to use a lot of raw materials to clean the machine, it is impossible to remove the mix color or carbonization completely and it even wastes half day of production. Finally, people forced to remove the screw by manual cleaning. It is waste a lot of time and raw materials, and the quality is not good, also long time shut down will influence the normal production.
If there is a hot runner system, the gates often have the mixing color problem, which is because the hot runner have many corners, it will occur resin residue, which will form carbonization after a long time. The special design of Easy Purge can help you solve these problems、save purging costs、improve the quality and product competitive. 

Common cleaning methods for injection molding machines, extruders and blow molding machines:
1. Use raw materials to flush
2. Use drainage opening material, secondary material and scrap to flush
3. Pull out the screw
4. Various self-developed cleaning methods, such as washing powder, cola, etc
5. Physical cleaning products
6. Chemical cleaning products

EasyPurge Purging method for cleaning injection molding machines, extruders and blow molding machines :
Easypurge is chemical cleaning product, but no corrosion, non-toxic, Through temperature change to react with the pollutants in the screw and barrel.  softening, breaking the molecular chain of pollutants, then purge it out.

Easy Purge purging compound removes all traces of barrel residue in any plastics processing application in less time and for less cost. Nowadays, it is the most effective purging technology, utilizing a completely new reactive chemistry, and thereby eliminating the need for multiple purging products. Processors will only have to store and use only one purging product instead of several, dramatically reducing overhead and operating costs.

Easy Purge consists of concentrated purge pellets that react chemically to heat, quickly and effectively cleaning machinery without extra soak time, (only 60 to 90 seconds needed) downtime or lost productivity.  The purge is so effective that even deposits accumulated over long periods are often removed the first time Easy Purge is used.